H-12W & H-12N

רמקול מוגבר "12 + טוויטר ברליום "1 ב-2 חלופות לזווית הפיזור- 50*100 מעלות ו- 40*60 מעלות

עצמה מקסימלית 126dB, כולל מגבר פנימי בהספק 1,105 WATT RMS.

תחום היענות 55Hz-21kHz.

כולל חיבור XLR אנלוגי ודיגיטלי, חיבור לרשת עבור פרוססור.

מתוצרת VUE AUDIOTECHNIK.

h-12 Features

  • Large format Neodymium HF compression driver (4-in / 100 mm diamater) with Truextent® beryllium diaphragm for exceptional high frequency clarity and output
  • Powerful built-in amplification with 830 watts LF and 275 watts HF power long term sine wave to each driver (more than 2400 watts total peak) for maximum output and exceptional transient reproduction
  • Wide 100º x 50º coverage or Narrow 60° x 40° coverage
  • Integrated internal VUEDrive System Engine equipped with 64-bit digital processor and tons of amplifier horsepower and universal mains operation (85V to 260V)

Description

VUE’s first h-Class system, the h-12 was designed with a “no-compromises” design philosophy, VUE’s h-Class engineering team re-examined every single element of the loudspeaker equation, and then applied our most advanced technologies to deliver measurable improvements in clarity, frequency response and SPL. From their precision-engineered transducers with cutting-edge diaphragm materials and suspension components, to their highly sophisticated active electronics and digital signal processing, every element of an h-Class system was optimized to deliver unparalleled sonic performance for applications where output and fidelity are critical.

The two-way h-12 combines a precision-engineered, 12‑inch LF transducer with a horn-loaded compression driver that features a Truextent beryllium diaphragm at it’s core.  The h-12 is available in both wide and narrow coverage versions. The h-12 is available in both wide (90 degree horizontal) and narrow (60 degree horizontal) coverage versions. The trapezoidal enclsoure designed to be highly versatile, and sports built-in pole mount and M-10 inserts for use with optional yoke and rigging hardware to allow easy deployment as a main system, or in a variety of support configurations.

Finally, every h-Class model ships with networking capabilities built-in right out of the box. And since VUE’s network technology relies on standard IP protocols, setup is a breeze. Once assembled, supplied SystemVUE software provides control and monitoring capabilities through a highly intuitive and powerful user interface.

h-Class systems were also designed to be highly versatile. The h-12 is available in both wide and narrow coverage versions, while built-in pole mounts and optional rigging hardware allow easy deployment as a main system, or in a variety of support configurations.

Cutting-Edge Transducer Design

The h-12 self powered two-way system employs a VUE-designed compression driver that features a revolutionary Truextent® beryllium diaphragm at its core. Beryllium outperforms both aluminum and titanium thanks to an extremely high stiffness-to-mass ratio, which dramatically reduces mechanical deformation and shifts breakup nodes up in frequency well above the audible range. The net result is a more defined high frequencies at much higher SPLs than more conventional materials. High frequency performance is further enhanced thanks to a complex five-slit phase plug and a powerful, lightweight neodymium magnetic circuit.

The unique compression driver is mated to an equally capable low frequency transducer that is also designed and manufactured by VUE specifically for the h-12. This precision-engineered 12-inch transducer utilizes a large, 4-inch (100 mm) voice coil to dramatically increase power handling while minimizing power compression losses. An impregnated linen surround, curvilinear cone optimized for  mechanical stability is supported by a massive high coercivity ferrite magnet circuit.  The LF driver’s over built consecution provides exceptional durability to ensure years of reliable service under the most severe conditions.

On-board VUEDrive™ System Engine  dsp & amplification

The h-12 is fitted with a 2-channel power amplifier module that supplies 830W long-term, sine wave (2000W peak) to the LF transducer, and 275W long-term, sine wave (400W peak) to the beryllium compression driver.

The module’s Class D circuitry allows for massive output and headroom in an extremely compact form factor, while producing significantly less heat than more conventional designs. The amplifier is mounted to a large aluminum heat sink with machined “VUE” logo. The combination of Class D amplification and ample heat dispersion eliminates the need for noisy cooling fans.

A lightweight, fully protected switch mode power supply with auto voltage detection provides hassle-free worldwide operation with universal mains operation for 120 V and 230 V. Self-protection circuitry includes input limiter, short circuit protection, DC protection of output, under and over voltage protection, intelligent mains fuse protection, power stage overload protection, and temperature protection of both transformers and heat-sinks.

Sophisticated DSP and onboard networking capabilities come courtesy of a 64-bit, 96 kHz sample rate, mixed-mode processor that delivers 120 dB of dynamic range with less than 600 microseconds latency.

Every h-Class model ships with networking capabilities builtin right out of the box. And since VUE’s network technology relies on standard IP protocols, set-up is a breeze. Once assembled, supplied SystemVUE software provides control and monitoring capabilities through a highly intuitive and powerful user interface. The on-board VUEDrive™ supports analog, AES/EBU digital and Dante network audio streams as inputs.

Finally, since full networking capabilities were conceived as part of the amplifier module’s initial design specification, the h-12 module provides impressive amounts of detailed, real-time information, as well as access to key operating parameters when connected to the SystemVUE network. Accessible functions and monitoring options include: protect status, mute, heatsink temperature, clip (for each amp channel), output voltage (for each channel), output current (for each channel), and SMPS limit (power supply limit).

Quality Down to the Finest Details

Even the smallest details of the h-Class systems are made to a raise the standard of what you can expect from a professional loudspeakers system. The grills and handle bezels are coated with a two part finish that lays a transparent candy-apple red coating on top of a base coat of black to give the systems a deep texture while remaining unobtrusive.

All h-Class enclosures are manufactured to the strictest ISO standards, using multi-ply, cross-grain laminated Baltic birch with extensive interior bracing for resonant free output. Full-range models include integrated hanging points for use with optional flying hardware. A rugged, polyurethane finish ensures years of on-the-road service.